What was the software used?
And what bluray? BRips and other encodes are not likely to include the lossless DTS formats.
eac3to to remap to 5.1?
And what bluray? BRips and other encodes are not likely to include the lossless DTS formats.
eac3to to remap to 5.1?
dts-core -> mono wavs using eac3to
mono waves imported into audition to edited the credits with proper channel layout
export to 5.1 wav
5.1 wav transcoded to 5.1 flac
I’ve access to the original DTS-HD Master Audio in 7.1.
It would be easy to downmix to 5.1 and retain bit-for-bit accuracy.
Sounds like a BRrip. Most scenes/groups/releases on torrent sites and Direct Download Link (DDL/warez) sites use the core only.
It’s just taking an hour or so to download a remux.
2: DTS Master Audio, English, 7.1 (strange setup) channels, 24 bits, 48kHz, 1ms
(core: DTS-ES, 5.1 channels, 24 bits, 1509kbps, 48kHz)
CAUTION: Decoding this track with ArcSoft results in low volume. <WARNING>
The 7.1 track is most likely an upmix on the studio’s part to try appeal to people with 7.1 surround sound systems.
I usually see this in old movies that originally mastered for 5.1 (throughout the entire production) that get re-released and "remastered" in 7.1.
Garbage matrixing, stupid studio mastering.
Using Sonic decoder to extract 5.1 (drops the surround sound channels — which are probably just echoed).
It’s still bit-accurate (up to 5.1).
EDIT: I was still converting it as I was typing this out.
"Strange setup" always turns out like crap and should only be converted to another "7.1 (strange setup)" format.
There’s literally nothing that will fix it. Unless you’re rich and buy the DTS SDK.
It doesn’t help to convert to FLAC with MakeMKV either, since it’s still a messed up track.
The core actually does sound better in this horrible mix.
Arcsoft and, suprisingly, Sonic have the altered volumes which produce unsatisfactory results.
The whole thing is warped with the two decoders.
The Arcsoft and Sonic decoded versions sound as if they were run through some horrible normalization where each note of bass flattens and jars the listening experience. It almost mutes the rest of the music were bass is concerned.
Sorry, but I’m opting to not upgrade this one as it’s totally ruined from the beginning.
Stick with the lossy core.
And, I won’t be providing anyone with a remux of the end credits either, as it won’t do anyone any good in any software with any level of skills.
Neither Arcosft nor Sonic can decode it bit-accurately and just worsens the audio.
———- Post added at 08:15 PM ———- Previous post was at 08:11 PM ———-
dts-core -> mono wavs using eac3to
mono waves imported into audition to edited the credits with proper channel layout
Also, if you convert to wav with eac3to, you can import single WAV file in proper channel layout, as eac3to converts to proper channel layout (to WAV spec).
If you mute in reverse order: SL+SR+LFE (useless in most scenarios) + C
and then slowly unmute each channel, you’ll hear the difference when the surround channels are present with the choir.
Surprisingly, it doesn’t crap out like Arcsoft or Sonic decoders.
So, here’s the original 7.1 audio track in FLAC which doesn’t so bad.
I didn’t edit out the beginning sound that ends the movie.
There’s reverb from the previous music cue that makes the movie fade to black (or cut to black, can’t remember).
And then the end credits pick up from there.
I’ll just leave this right here.
https://mega.co.nz/#!bYsz0DqA!VWd-0LjWMns7tDx4mu_-74vC1r1x5jFJ7EZG8-Reb2o
Password:
sparktank
If the link goes down, I won’t be re-upping this one.
I’m certain once someone edits it, that’ll be the version you want re-upped in the future.
Also since eac3to updated with dcadec, I might look for the audio stream to download from somewhere….